Product Information
The
XW Conduit Box mounts directly to the bottom of an inverter/charger to
safely protect end-users from inadvertent contact with wiring or
connections. It comes bundled with the XW Power Distribution Panel and
the XW Connection Kit; however, it is also is available separately for
systems larger than two inverters, or to retrofit inverters into
existing systems which may already have AC/DC disconnects.
The Conduit Box is easily secured with two screws provided on the
bottom of the inverter. The bottom flange of the conduit box can then
be attached (fasteners not provided) to the wall to complete the
installation. The front panel of the conduit box can be removed by
removing the two screws on the front, allowing ample space to make all
necessary wire connections.
In multi-unit installations, the sides of adjacent conduit boxes can
be removed to create an effective raceway with lots of volume to run AC
and DC inverter cabling. The conduit box also includes multiple cable
strap points, allowing the final installation to look clean and
professional.
In addition, an internal sheet metal barrier is included to keep communications wires separate from AC and DC power wires.
Conduit Box dimensions (H x W x D): 8.5 x 16 x 8.25” (229 x 406 x 210 mm)
Shipping dimensions (H x W x D): 17.5 x 13 x 12” (445 x 330 x 305 mm)
Shipping weight: 10.0 lb (4.6 kg)
