| StormPro Overview ***Click Here for Run Times and to Download A Brochure***
The StormPro SP800 Flood Control System is a heavy duty 1/3 HP Sump Pump System, complete with a battery back-up power solution. The included Sump Pump is powerful enough to be used as a primary sump pump, installed as a replacement of any existing primary sump pump or as a secondary pump as a back-up to any main or existing sump pump. The included battery back-up is powerful enough to provide back-up power to the included sump pump as a primary or secondary pump for up to 6 hours of continuous run-time.* The back-up powerpack stores household electricity in an internal battery and provides instantaneous power to the sump pump when utility power fails. The StormPro powerpack is a clean, quiet, smart alternative to a generator, produces no emissions and is safe to operate indoors.
*Operating hours calculated based on a typical average cycling rate of 100%.at 3000 GPM. Actual run times will vary based on actualcycling rates for the installed environment, thus actual run-times may be higher or lower depending on the actual rate at which the pump cycles on and off. 2007 Alta Power Corp. All rights reserved. Alta Power and Altapower.tv are registered trademarks of Alta Power Corp. Printed in USA.
How It Works
After installing and configuring the StormPro Sump Pump as your primary or secondary pump, simply plug the sump pump into the StormPro PowerPack and plug the powerpack into a standard wall outlet. Once your sump pump is connected to the powerpack, the powerpack will continue to use your utility power until a power failure is detected. Once a power failure is detected, the powerpack will instantaneously begin to supply standard household electricity to the connected sump pump. Once utility power is restored, the powerpack will automatically switch the sump pump to utility power and immediately begin to recharge the integrated battery in anticipation of the next power failure.
What's Included Includes everything you will need to instantly provide back-up power out of the box.
- (1) 1/3 HP Heavy Duty Sump Pump
- (1) Fully Adjustable SPI Vertical On/Off Float Switch
- (1) Power Head; built-in 800w modified sine wave inverter with 5 amp charger
- (2)120 amp-hour Sealed Lead Acid AGM battery*
* non-expandable battery capacity, 240ah max battery capacity
Features - 1/3 HP, 2.1 Amp@115vAC Heavy Duty Sump Pump with on/off float switch
- High Efficiency, low wattage, delivers up to 3000 GPH@10 FT.
- Operates on AC or DC power
- Installs as primary or secondary sump pump
- Automatic Transfer to/from back-up power
- Automatic Charger and Battery Monitoring System
- No emissions, no exhaust, no moving parts, silent operation |
