Little Beaver - 10 Inch Replacement Blade Kit - Model - 9023-10

10 Inch Replacement Blade Kit for LITTLE BEAVER Drill Assembly
--------------------------------------------------------------------------------------------------------------------------------------------------------------
        STANDARD DRILLS            PENGO DRILLS            BLADE TYPES            DRILL EXTENSIONS        --------------------------------------------------------------------------------------------------------------------------------------------------------------
****** For use with LITTLE BEAVER Drill Assemblies only.*******

     1 Replacement Blade - Standard Steel Construction
     Replacement Bolts and Screws
--------------------------------------------------------------------------------------------------------------------------------------------------------------

Little Beaver Standard Points & Blades
All standard "Snap-On" Little Beaver augers are equiped with hardened, replaceable points and side mounted cutting blades.  These components do the actual cutting as the auger rotates, thus protecting the auger which guards against excessive wear.  To insure maximum digging efficiency and auger life, the point and blade should be replaced when they become dull. 

Small diameter augers (1.5", 2", 3") feature screw-on points only.  All other points and blades are bolt-on.  Only two bolt-on point sizes are required: one for 4" thru 12" diameter augers and the other for 14" thru 16" diameter augers.  The side-mounted cutting blade is available in the 4" thru 16" diameter drills.

Optional Carbide Blades
When Drilling in hard clay, frozen ground, or hard pan soils, carbide blades are recommended. By cuting the clay or ground into small pieces rather than digging into these materials, you will realize faster hole drilling.

These blades mount to the bottoem of standard augers, replacing both the standard point and side cutting blade.  Grade 5 mounting bolts and locknuts are included with the 4" thru 14" carbide blades. 

Note: 1-1/2", 2", and 3" Carbide Blades are Screw-on and fit only on the Standard Snap-on Augers. The 4" threw 14" carbide blades include mounting bolts and lock nuts.